Water Heater Installation Tips

If you’re thinking of replacing your old water heater installation with a new one, there are several things to consider. For example, you’ll need to make sure it’s connected to your home’s plumbing and electric lines. If you don’t, you may experience leaks and electrical problems.

What to do when your hot water heater is not working?

Ideally, you’ll want to have a plumbing inspector inspect your new water heater before installation. They can ensure it’s properly routed and that it meets all local building codes.

You should have your local building department or plumber provide you with a list of your local building codes. These vary from state to state. If you’re installing a tank-style water heater, your local code may restrict you from installing it in storage closets or under floors. Similarly, if you’re installing an electric water heater, the local code may prohibit you from installing it in an attic.

In addition to complying with your local codes, you should also install the water heater in accordance with the manufacturer’s instructions. This includes ensuring that the thermostat is set to 110 degrees F. That way, the water will flow smoothly and you’ll have the proper temperature of water.

If you’re installing a gas-powered water heater, you’ll need to turn off the main gas valve. You’ll then have to disconnect the flare fitting and the gas supply line. You can use a tubing cutter to remove the old fitting.

When you’re finished, you’ll need to secure your new water heater to the wall. Depending on your area, you may need to use special straps to secure the unit.